FabForm Zuckle Bracing - 10/Box

Item: 00-FF-ZUCKLE



Zuckle Wall Aligner

Application: ICF Bracing

Manufacturer: Fab-Form Industries Ltd.



Finally. A wall aligner specifically designed for ICF walls. Only 3.6 pounds, just half the weight of conventional turnbuckles. And fast adjustment with an electric drill. Zuckles are sold by the box with 10 per box.

About Zuckle Wall Aligner

Straighter Walls

  • HoriZONTal walers are the first contact with the wall, straightening first in the horizontal direction.
  • Compare this with conventional vertical braces where the first contact is vertical, leading to a wavy horizontal alignment.


  • Zont™ bracing is approximately 10% the cost of vertical bracing.
  • Why rent conventional braces when you can buy for the same price?

Fast to Install

  • A 'twist' of the wrist quickly locks the horizontal waler and vertical strongback in position.

Light Weight

  • Zont™ waler brackets and Zuckle™ wall aligners weight 11% the weight of conventional vertical bracing.

Height Adaptable

  • Brace short stem walls or 20' tall walls.
  • Just add another row of Zonts™ and walers for every five feet of wall.

Easy Bucking

  • Window and end of wall bucks are easily reinforced as there is no vertical braces in the way.


  • Use site available 2x4s, save on delivery and storage costs.

Easy to Transport

  • Fit 15 Zont™ braces (30 Zonts™ and 15 Zuckles™) into a recycle bin and 5 gallon bucket.
  • Try that with 15 conventional braces.

Accommodate Ledger Boards

  • With conventional bracing it is not possible to install ledger boards prior to the concrete pour as the ledgers get in the way of the vertical braces. With Zont bracing the vertical strongbacks easily clear the ledgers. This is a much more cost effective method than using ICFVL brackets.

Accommodate Brick Ledges

  • As the space between the ICF block and the Zont strong back is 3 5/8", the bracing will go over the brick ledge without problem. This is not possible with conventional braces.

Accommodate Openings Next to Corners

  • Window and door openings located near to corners must be reinforced to prevent the corner from blowing off the buck. With Zont bracing, horizontal cleats can easily be installed without interference.



Product Specs

Product Specs

Installation on Pre-Poured Footings & Slabs

All bracing systems must align the wall and provide a walkway for building the top of the wall and place the concrete. Most inspection agencies require a 20" wide walkway (two 2x10s) and a guard rail when the catwalk height is greater than 6".

Zont Twist Bracing for Catwalk Heights Less Than 6-Feet

Download PDF

Zont Twist Bracing for Catwalk Heights Greater Than 6-Feet

Download PDF


To top