Fab-Form Fastfoot 50" 4/Box

Item: 00-FF-50




  • Made of high-density polyethylene fabric, Fastfoot® is a green replacement of lumber and plywood for forming concrete footings.
  • A 100' roll of Fastfoot® forms the same concrete as 1,500 pounds of lumber.
  • All new Fastfoot® 'XT' is now printed in three colors for easy reference of footing width lines and QR codes for onsite reference to the installation quide.
  • Nominated in 2010 and 2012 as the Contractors' Choice product of the year.


Prevents Concrete Damage

  • Fastfoot® is a closed form. As seen from this photo there is no concrete damage to screed boards and stakes.
  • This means your 2x4s and stakes can be re-used indefinitely.

Adapts to Uneven Ground, Rock

  • Special colored width lines allow Fastfoot® to be 'let out' or 'pulled in' to accommodate uneven excavations.
  • No need to scab lumber on the sides of your footings or shovel the ground to achieve the footing depth.
  • Fastfoot® is perfect over rock as shown in this photo.

Ideal for Stepped Footings

Fastfoot® quickly adapts to the uneven contours of your bank. No need to waste plywood.

Forms Deep Footings

  • Fastfoot® is ideal for deep footings and commercial pads. Form footings up to 4' deep.
  • Eliminate expensive and heavy plywood and eliminate expensive re-cycling of formwork.
  • Click image for commercial use of Fastfoot®.

Prevents Rising Damp

  • Concrete is 'hygroscopic', wicking up ground moisture which leads to a damp and moldy interior.
  • Fastfoot® is a damp proof membrane, preventing ground moisture wicking into the footing concrete, providing a drier, healthier indoor environment.
  • Prevents Ground Water Contamination
  • Fastfoot® is a closed form, preventing cement fines from entering the water table.

Stronger Concrete

As the picture above shows, Fastfoot® prevents the footing concrete from being contaminated by mud and water, leading to a stronger concrete. In the summer, Fastfoot® prevents rapid evaporation of moisture in the sides and bottom of the footing. This ensures adequate moisture for proper hydration of the cement particles.


Fastfoot® is LEED® contributing and GreenSpec® listed.

To top