Zoom

Poly Wall 12" Detail Tape

Item: 00-PW-HS12

Description

Description

Poly Wall® Home Stretch™ Detail Tape is a strong, pliable, self-adhesive sheet consisting of a cross-laminated, high-density polyethylene (HDPE) backing bonded to a rubberized asphalt compound.

Uses

Poly Wall® Home Stretch™ Detail Tape is used to fabricate inside and outside corners, seal penetrations, control joints, cold joints and to patch damaged areas of Home Stretch™ Waterproofing Membrane.

Features & Benefits

  • Strong & Pliable
  • Self-Adhesive
  • Seals penetrations & joints
  • Can be used for patching damaged areas
  • Cross-laminated HDPE backing bonded to a rubberized asphalt compound
  • Contributes to a complete system when used with Home Stretch™ ICF Waterproofing Membrane

Easy Installation

All substrates should be clean, dry and free of contaminates, and primed with Poly Wall® Home Stretch WB Liquid Adhesive or Polybond Clear Liquid Adhesive before application of the Poly Wall® Detail Tape. Please refer to the installation guidelines for complete, detailed instructions.

Product Specs

Product Specs

Home Stretch Peel 'N Stick Membrane Properties 

Property Test Method Typical Value

Thickness

   40 mils

Application Temp

   25°F and above

Elongation

 ASTM D412 300%

Tensile Strength (Membrane)

 ASTM D412-modified 325 psi

Tensile Strength (Film)

 ASTM D882 3900 psi (26.9 Mpa)
Peel Strength ASTM D903 9 lbs/in (1576 N/m)

Minimum Puncture Resistance- Membrane

 ASTM E154 50 lbs

Flexibility at -22°F

 ASTM D1970 Pass

Water Vapor Transmission

 ASTM E96 0.02 perms (1.14 ng/Pa.s.m²)
Lap Peel Strength @ 41°F ASTM D1876 3.3 lbf/in (580N/m)
Hydrostatic Head ASTM D5385 231 feet (60 m of water)
Moisture Absorption ASTM D570-81 0.1% maximum

 

Roll Size Rolls/Bx SF/Box LBS/Box Boxes/Pallet
36" X 66.7' 1 200 ft. 50 36

General Specs

General Specs

Features & Benefits

  • Factory controlled 40-mil uniform and consistent thickness
  • Side lap design delivers increased water tightness
  • Extended selvage edge provides asphalt-to-asphalt adhesion at the seam
  • Appropriate for use with both Expanded and Extruded Polystyrene ICF Systems
  • High Tensile Strength with terrific flexibility
  • Can be used in colder weather…25 degrees F and rising (only possible with the use of Polybond Clear Liquid Adhesive)
  • No VOC’s, No odor
  • Release film does not tear easily and protects adhesive layer

To top